15万吨煤焦油加工项目工艺说明.docVIP

1234精细化工有限公司 建 设 情 况 简 介 2013.12目 录 1建设规模及产品方案 1 2工艺技术方案 1 3主要产品质量与能耗 1 4投资规模....................................................................................................................................4 1.拟建项目的基本情况 1.1建设规模1.2产品方案 本项目产品方案选择根据以下原则进行： （1）具有成熟分离技术的产品； （2）分离产品经济效益好、市场前景广阔； （3）产品可进一步深加工以提高效益； （4）能满足环保方面要求。本项目产品确定如下：万吨煤焦油加工装置产品表1 轻油 t/a 750 0.5% 2 脱酚酚油 t/a 2550 1.7% 3 工业萘 t/a 12750 8.5% 4 洗油 t/a 11250 7.5% 5 一蒽油 t/a 27000 18% 6 粗酚 t/a 1200 0.8% 7 重油 t/a 9000 6% 8 改质沥青 t/a 78000 52% 9 闪蒸重油 t/a 6000 4% 合计 148500 99% 2.工艺技术方案 投资规模 1234 construction work area in the form of conference reviews. (2) review program review date is determined by the project manager; According to the project manager of project quality control Department requires preparation of a management plan, representative of the management audit of the project, approved by the project manager; Review Project Office issued notices of meetings; Project manager facilitates the review meeting, scheduled content under review; Quality control Department is responsible for the records, the preparation of the review report and corrective action plan, representative of the management audit of the project, approved by the project manager; Quality control Department is responsible for the preparation of records and reports the distribution list, or publish to the Internet by engineering part of the project staff and departments. Organized by the quality control Department is responsible for tracking the implementation of corrective measures inspections. 3.4.5 the output from the management review shall include the following elements: the effectiveness and suitability of the quality management system, whether it be maintained and revised; Quality policy and quality objectives are achieved and to meet customer requirements, whether it be maintained and revised; The allocation of resources to meet requirements, whether you need to add o