jewelca戒指制作教程.docVIP

戒指的制作 1.在正视图下，创建17mm和20.5mm的圆。之后在创建1.775和1.5两个圆。如图1所示。 图1 2选择中间的小圆旋转复制一个Ctrl+→和Shift+←。转到右视图使用自由曲线画一条斜线。将复制的小圆向右投影在斜线上。如图2所示。 图2 3回到正视图，绘制一个切面。如图3所示图3 4.使用导轨曲面生成如图4、5、6、所示 图4 图5 图6 5顶视图创建一个6.85mm和9.25mm的椭圆。之后创建两个0.6mm的圆测量。如图7所示 图7 6在正视图绘制一个切面生成如图8 、图9所示。回到顶视图 调整如图10所示。 图8 图9 图10 7.在杂项里面取出一个宝石调整图11所示。回到正视图展示物件CV点 框选底部CV点使用尺寸变形工具收缩如图12、13所示。图11 图12 图13 8.如图14、15所示。相减成如图16所示。 图14 图15 图16 9.选择物件移动到合适的位子如图17所示，利用左右对称线绘制如图18所示，转到右视图左右镜像，线面连接，相减如图20所示。 图17 图18 图19 图20 10在右视图绘制三条曲线如图21、22所示。正视图绘制一个切面如图23所示。利用导轨曲面如图24所示，生成如图25所示。 图21 图22 图23 图24 图25 11．在正视图绘制如图26所示，生成如图27所示。 图26 图27 12.从杂项取出一颗1.5mm的宝石，在正视图利用自由曲线绘制一根曲线，生成如图28所示。在顶视图绘制一个1.5mm的圆，偏移曲线0.2mm，绘制一个切面如图29 生成如图30所示。 图28 图29 图30 13.在正视图绘制一个0.5mm的圆，绘制一条曲线生成如图31、32所示 图31 图32 14．隐藏复制粘贴如图33所示。环形复制4个和8个。最终效果如图34、35所示。 图33 图34 图35 and due diligence evaluations article 22nd head office, branch (jurisdiction), risk management, marketing management branch within the Departments credit business person assumed responsibility for the supervision and inspection and due diligence evaluations. Article 23rd, Head Office, branches (jurisdiction), risk management, Marketing Management Department through on-site and off-site inspection, investigation report, interviews with investigators for pre-loan investigation work by way of conducting supervision and inspection, quality evaluation pre-loan investigation work, and based on the evaluation results, the implementation of diversity management. 24th the control and inspection (a) the implementation of the credit system: there is no breach of credit policy relating to the granting of credit and the head office; (B) dual credit rating: timeliness of ratings, whether the provisions of the rating, rating results are accurate; (C) the survey contents: data collection is complete, report writing is comprehensive, indicators analysis is objective, real, conclusions and the facts are consistent and reasonable; (D) double implement