HP5000500激光打印机粉盒(4129X)加粉图解.docVIP

HP5000/5100激光打印机粉盒（4129X）加粉图解 1、HP5000与文杰A5000、佳能850/870/910粉盒通用,拆解方法相同。 2、粉盒的粉仓与废粉仓的连接是通过两侧的两个固定销钉边接的,将这两个销钉分別拔出。 3、拔出另一側的固定銷釘，在復原時,注意磁輥和感光鼓相對,以及銷釘插入時,要對孔。 4、拆解開后的粉盒分成兩部分,注意兩端緩壓彈簧。 5、HP5000的感光鼓是由兩側的架子固定的,用螺絲刀擰下一端的兩個固定螺絲,將鐵架子拔出。 6、擰下另一端的兩個固定螺絲,摘下固定架子,可將感光鼓取出,注意感光鼓不要磕碰以及避光保存。 7、拆下OPC后的廢粉倉展開圖,對於磨損嚴重或有缺陷的OPC應當更換。 8、摘下充電輥,用我公司提供的拋光劑可對充電輥進行修復保養。 9、摘下充電輥后的廢粉倉。擰下刮板的兩個固定螺絲就可摘下刮板,以及清理廢粉倉。 注意:當刮板橡膠發黃時應當更換刮板 10、將鼓蓋轉到后部,用一字螺絲刀,輕輕將導杆摘下。 11、擰下齒輪端的末端頂板的三個固定螺絲。 12、將頂板慢慢拔出,注意用力平行。 13、摘開末端頂板后的展開圖,復原后注意2個觸點。 14、將粉倉內及磁輥上的余粉清理乾淨,再從加粉入口處灌粉(加粉時注意握緊磁輥,以防碳粉漏出)。15、加完碳粉后,再逆著拆解的步驟，將粉盒復原。 I signed with the Bank of the qilu Bank loan contract (contract) conventions, and I use scheme, I would request the loans (in words) until I opened personal settlement account with your Bank (account), uses loan for 。 Loan operation, business unit name: account number: loan funds from these personal settlement account into the account of a payment. Loans in accordance with the following payment methods to pay. One, lender trustee payment. Delegate qilu Bank loan funds of the borrower to meet the stipulation of the contract the following borrowers, counterparties, commitment funds, regulatory compliance, legal, and willing to take the pay disputes, loss and other consequences of the delegate. Payee account number Bank name amount purpose II, borrowers own payment methods. Qilu Bank according to the borrowers withdrawal request to loan funds disbursed directly to the borrowers account, and independently by the borrower payments to borrowers who meet the stipulation of the contract transactions. I guarantee to your bank contracts and other prove of material submitted by real and effective. When in accordance with one payment, I agree with the above account with your bank loan funds that are not used for stop payment management,stop paid confirmed book records table single 13: lifted check pay notice records table single 14: personal loan ahead of repayment application accepted tabl