建立健全惩治和防腐败长效机制.docVIP

建立健全惩治和预防腐败长效机制 XX研究所 纪律检查委员会 2012年月小金库设置外以个人名义私存公款等“小金库”行为。上级生活会在“三重一大”（重大决策、重要干部的任免、重要项目的安排；大额资金的使用）事项决策坚持按程序办事，提高了决策的民主化、科学化和制度化。效能监察效能监察 and performance test copies of the record. If necessary, review should be carried out; 4 for spring hangers included simple spring, hangers and constant support hangers it should also be recognized as setting and locking of loads. 5 check the surface quality, folded layering and without cracks, rust and other defects. 5 after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust torque limit requirements; increase the stability of piping systems to prevent pipeline ... Tube wall thickness mm 2-3 4-6 7-10 weld form no slope mouth weld strengthening height h mm 1-1.5 1.5-2 weld width b mm 5-6 7-6 has slope mouth weld strengthening height h mm 1.5-2 2 weld width b mm cover had each edge slope mouth about 2 mm argon arc welding weld strengthening surface height and width tube