arcgis操实例1图解数据统计图制作.docVIP

图解:GIS人口统计图制作过程? ? 杭州二中东河校区准备工作：1、excel统计数据，可以网上查找，自己制作。我的excel文件：? ?? ?? ?? ? ? 2、省区范围底图，我是用李剑老师共享的“国空地理基础地理信息数据”。效果图如下： ? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? 效果图图如前文。 举一反三： ☆若把关联字段NAME改成Bou2_4m_???（注：因为沿海省份岛屿众多，因而范围图是由多个图形组成，但NAME名称一样，势必会在???????????同一个省显示多个数据。但同一省内的不同图形的Bou2_4m_字段各不相同。我在excel????????????表内只引用了一个省中面积较大的图形的Bou2_4m_字段值，因而选Bou2_4m_字段作???????????? 为关联每个省只显示一个数据。）??在第五步显示框类：选 数量-分级色彩 可得分色图??????????????????????????????????? ? 数量-分级符号 可得点状图???????????????????????????????????? 数量-点密度? ???可得点密度图???????????????????????? ??????? 选 图表-条形状/柱状图，再加载2011年数据??可得柱状图??????????????????????????????? ? ????图表-条形状/柱状图，再加载2000年和2011数据??可得柱比较图? ?不同的效果图如下： ARCGIS专题制图材料1 1.图解：GIS人口统计图制作过程 coupling Centre shall be checked, the second poured concrete strength of more than 70%. In the process of reaming or boring, apart from the special provisions in factory, does not allow any work that may affect the coupling Centre, such as irrigation, to cylinder connections to flood the condenser pipes and so on. Well boring, hinge bolt hole flange with coupling of vertical, not oblique. Mounting bolts should be added lubricants, typing gently with a small hammer, not too loose or too tight, packed the bolts with the corresponding seal screw hole should be marked. 6.4.5.4.2 coupling reamed and pairings is close to the diameter of bolt bearing good hinge holes, dressed with a good two coupling bolts before you can move the rotor, boring-reaming hole in turn. Coupling bolts must be tight coupling is symmetrical diameter, in boring, reaming, two bolts out. Well boring, hinge bolt hole flange with coupling of vertical, not oblique. Due to the coupling bolts in accordance with hinge holes corresponding to the diameter of the