基于USB的数采集卡设计.docVIP

四川师范大学成都学院本科毕业设计 基于USB的数据采集卡设计 学生姓名 杜学成 学 号 座机电话号码38 所 在 系 通信工程系 专业名称 通信工程 班 级 2009级1班 指导教师 段纯爽 四川师范大学成都学院 二○一三年三月 基于USB的数据采集卡设计 学生：杜学成 指导教师：段纯爽 内容摘要：本论文所设计的数据采集卡是在单片机AT89C5131控制下进行数据采集，主要核心部分是微控制器和USB控制器，通过者结合实现上位机和下位机之间的USB通信，USB通讯技术出现后，使高传输速度、强纠错能力、易扩展性、即插即用等优点有机的结合在一起，使得USB数据采集发展前景更为广阔。 关键词：数据采集 USB接口 控制器 Design of data acquisition card based on USB Abstract:The data acquisition system designed is under the control of SCM data acquisition in AT89C5131. The micro controller and the USB controller as the core part, implementation of USB communication between upper machine and lower machine through the combination of the two, there to the data line via the USB data is transmitted to the PC through the AT89C5131 collection. And the development of applications on PC, from the USB data acquisition interface on PC machine, can display the waveform function of data acquisition, data acquisition function. In data acquisition system, communication host and peripherals traditional mouth generally use the ISA, PCI, 1394 standards, these interface products, based on the installation of trouble, the price is expensive, and the slot number, address and interrupt resources constraints, poor scalability, USB, is a good solution to the above problem. USB is a kind of serial communication standard model, the transmission rate is high, good scalability, the bus power supply, the use of flexible. It has a total of 4 transmission modes: control transfer, interrupt transfer, synchronous transmission, mass transfer, in order to adapt to the needs of different equipment. The rapid development of information technology and electronic technology, the computer and peripheral equipment has also been rapid development and application. In the past people only pursue the transmission speed between computer and peripherals, simplicity of installation error correction ability and operation now has become one of the focuses of the target. USB communication technology, the high t