毕业设计(论文)_氨选择性催化还原处理硝酸厂尾气的设计课程设计.docVIP

  • 3
  • 0
  • 约3.78万字
  • 约 69页
  • 2017-03-05 发布于辽宁
  • 举报

毕业设计(论文)_氨选择性催化还原处理硝酸厂尾气的设计课程设计.doc

毕业设计(论文)_氨选择性催化还原处理硝酸厂尾气的设计课程设计.doc

攀枝花学院本科毕业设计(论文) 氨选择性催化还原处理硝酸厂 尾气的设计 学生姓名: 颜 溧 学生学号: 座机电话号码3040 院(系): 生物与化学工程学院 年级专业: 环境工程 指导教师: 伍斌 讲师 摘 要 NOx的排放对我国的环境造成越来越大的危害,而选择性催化还原是使用最广泛,技术最成熟的脱硝技术。故本设计,采用, 关键词,, ABSTRACT It is great harmful for the environment by the emission of NOx,while selective catalytic reduction is the most widely used and the most mature denitration technology.So the design used the ammonia selective catalytic reduction processing by four SCR reactor for denitration processing and four heat exchanger according to the characteristics of nitric acid tail gas that factory discharged,and unit had the cap

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档