2015年河北中毕业生升学文化课模拟考试文综试卷及答案冲刺.docVIP

2015年河北省初中毕业生升学文化课模拟考试文综试卷(冲刺型）参考答案 1-5. CADDB 6-10. CDACB 11-15. DBBCC 16-20. ABAAB 21-23. CDA （1）各从一个角度对图图中士 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and