如何用PS拼接片_两个方法.doc

学习要点:1. 图层透明度2. 蒙板3. 渐变工具先看几张用Photoshop拼接的风景长卷江山如此多娇/photoblog/page.do?method=picPagepid=324600from=photoblog第一张三洲田风光’是4张照片合成??第二张远眺盐田港是2张照片合成第三张远眺大梅沙是2张照片合成下面以合成远眺大梅沙为例,?介绍制作的步骤:1. 新建一个Photoshop文件js.psd,?图片大小为2000*4002. 打开一张原图,改变图片大小为704*4703. 将改变大小后的图片拷贝粘贴到js.psd上成为图层1,同理,将另一张准备合并的图改变大小后copy到js.psd上成为图层2,如图所示4. 比较两图,图层2的右边比较复杂,图层1的左边图片内容较少,?所以将图层1移到图层2的上面(衔接起来要简单些)5. 将图层1的透明度改为54%,目的是可以看到图层2的画面,方便衔接(透明度可以根据个人图片或喜好自行调整);调整图层1的位置和大小(可以用Ctrl+T自由变形实现),使两图层的衔接处尽量吻合6. 调整好图层1的位置大小后,将图层1的透明度重新改为100%,并增加蒙板(将图层拉到?即可增加蒙板)7. 将工具选为渐变工具,设置前景色为白色,背景色为黑色;?如图,用渐变工具从加了蒙板的图层1左边边缘附近开始拖动鼠标至左边边缘;?目的是将边缘渐变,与图层2融合;?8. 两图的色彩亮度还是有差别,将鼠标点到图层1的标记上(因为之前是作用在图层1的蒙板上,现在要作用在图层上),用Ctrl+M调整图层1的色彩亮度;?这样两图就溶为一幅了;?应用蒙板,合并图层,再添加标题和logo边框,?这样一幅江山如此多娇的风景长卷就打造完毕PS自动拼接图片功能之前在学校的时候，输出实验室时候就看到有这样效果的照片做出来，但是做起来很麻烦。当时听见老师说用ps8.0版本有简单方法做出来，（由于学校里的教的全是7.0版本，）所以我的这个问题一直到现在才找到答案。我现在就来和大家一起分享： 步骤一: 步骤二: 步骤三: 步骤四: 步骤五: 步骤六: 步骤七: 步骤八: 附上素材给感兴趣的朋友试一下: integrated energy, chemicals and textile Yibin city, are the three core pillars of the industry. In 2014, the wuliangye brand value to 73.58 billion yuan, the citys liquor industry slip to stabilise. Promoting deep development of integrated energy, advanced equipment manufacturing industry, changning district, shale gas production capacity reached 277 million cubic metres, built the countrys first independent high-yield wells and pipelines in the first section, the lead in factory production and supply to the population. 2.1-3 GDP growth figure 2.1-4 Yibin, Yibin city, Yibin city, fiscal revenue growth 2.1.4 topography terrain overall is Southwest, North-Eastern State. Low mountains and hills in the city landscape as the main ridge-and-Valley, pingba small fragmented nature picture for water and the second land of the seven hills. 236 meters to 2000 meters above sea level in the city, low mountain, 46.6% hills 45.3%, pingba only 8.1%. 2.1.5 development of Yibin landscapes and distinctive feature in the c