Photosh 制作圆形字体.docVIP

制作圆形字体的简单方法 如把冰糖葫芦做成圆形的字体, ps里面的文字变形工具就能轻易的达到这种效果.?我们现在来看下效果图: 在做文字之前呢,我们先来做一个水晶泡泡: ? appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should no