中国民族资本主的曲折发展教案(历史组张莉).doc

第10课 《中国民族资本主义的曲折发展》教案 西和一中历史教研组 张莉 教学目标 （1）识记：19世纪末，中国民族资本主义初步发展；一战期间中国民族资本主义进一步发展；实业救国；国民政府统治前十年，民族工业发展显著，抗日战争时期遭受沉重打击，《中美友好通商航海条约》签订；官僚资本的垄断；通货膨胀。 （2）理解：中国民族资本主义初步发展的原因及其影响；辛亥革命对民族资本主义发展的影响；民族工业出现短暂的春天及其短暂的原因；1927年～1936年民族工业发展的原因和地位，帝国主义、封建主义和官僚资本主义是阻碍近代民族工业发展的三大政治障碍。 （3）使学生认识到：帝国主义的侵略是阻碍近代民族工业发展的最根本的因素；自强不息的爱国精神是民族工业发展的不竭动力。 ? 教学重点和难点： 重点：民族资本主义的短暂春天，民国时期民族工业曲折发展的原因。 难点：影响中国民族资本主义发展的主要因素和民族工业的历史地位。 教学过程及要点： 导入新课： 提问：中国民族资本主义产生于什么时候？为什么会产生4、影响“实业救国”思潮 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, craf