毕业论文--熟料破碎机工作装置结构设计论文.docVIP

毕 业 设 计 设计题目：熟料破碎机工作装置结构设计 熟料破碎机工作装置结构设计 摘 要 熟料破碎机适用于矿山、水泥、煤炭、冶金、建材、公路、燃化等部门对中等硬度及脆性物料进行碎破碎机可根据用户要求蓖条调整蓖条间隙，改变出料粒度物料受高速运动的锤的打击、冲击、剪切、研磨作用而碎。碎物料Structure Design of Clinker Crusher’s Working Device Abstract Clinker crusher apply to the mining, cement, coal, metallurgy, building materials, roads, fuel sectors such as the middle of the hardness and brittleness Grinding materials clinker crusher can be added based on user requirements and the adjustment of the Bi Bi of the gap, to change the size expected to meet the different needs of different users. The design content of clinker crusher hammer device work. Its working principle: motor driven cavity broken rotor in high-speed rotation, high-speed movement of material by the hammer blow, impact, shear, grinding and crushing effect. In order to effect better broken, broken materials were high-speed movement when the hammer hit the impact to the lining, the material was broken secondary break up. This article is based on the basic principles and fundamental methods of the mechanical design to do the correlative design for the components of the clinker crusher, makes use of Pro/Engineering to model parts and make components for assembly, and finally takes full advantage of the ANSYS software for finite element analysis, in order to achieve theoptimal design of mechanical equipment. Key words: clinker crusher； rotor； hammer；scaleboardANSYS；finite element 仅供参考，支持原创，鄙视抄袭！ 目 录 1 引言 1 2 破碎机 2 2.1破碎机的定义和应用范围 2 2.2破碎机的分类及功能 2 2.2.1破碎机种类 2 2.2.2各种破碎机的功能 2 2.3破碎理论 4 3.熟料破碎机 8 3.1熟料破碎机的功能 8 3.2熟料破碎机的组成和原理 8 3.3熟料破碎机的优点 8 3.4破碎过程分析 9 4 基本结构尺寸的确定 11 4.1熟料破碎机的总体设计 11 4.1.1选择电动机 11 4.1.2确定传动方案 12 4.2转子转速的理论值 13 4.3设计破碎转子的直径与长度 14 4.4料口尺寸的设计 14 5 熟料破碎机工作部分零件设计 15 5.1破碎锤头的设计 15 5.1.1锤头作用和常用形式 15 5.1.2破碎锤头的确定 15 5.1.3锤头失效分析 17 5.1.4锤头材料的选择 18 5.2衬板的设计 19 5.3壳体 20 6 其它零件的选用及其基本结构尺寸的确定 23 6.1主轴组成 23 6.2皮带轮 23 6.3轴承的设计选择 24 6.4长 键 24 6.5锤架和锤盘 24 6.6轴承盖和轴承座 25 6.7空