高数习题(第十章).doc

高等数学（工科）第十二章习题 填空题 (1) 　　　　　　 ; 　　　　　　 . (2) 级数，当　　　　　　 时绝对收敛，当　　　　　　 时条件收敛， 当　　　　　　 时发散. (3) 的敛散性为　　　　　　 . 判断下列级数的敛散性. (1) (2) (3) (4) (5) (6) (7) (8) 3. 判定下列级数是条件收敛，还是绝对收敛，还是发散? （1） （2） （3） （4） （5） （6） 求下列幂级数的收敛域. （1） （2） 求幂函数的和函数. 6. 求幂级数的和函数. 7. 求幂级数的收敛域及和函数，并求数项级数的和. 8. 将函数展开成的幂级数. 9. 将在处展开成泰勒级数. 10.将函数展成的幂级数. coupling Centre shall be checked, the second poured concrete strength of more than 70%. In the process of reaming or boring, apart from the special provisions in factory, does not allow any work that may affect the coupling Centre, such as irrigation, to cylinder connections to flood the condenser pipes and so on. Well boring, hinge bolt hole flange with coupling of vertical, not oblique. Mounting bolts should be added lubricants, typing gently with a small hammer, not too loose or too tight, packed the bolts with the corresponding seal screw hole should be marked. 6.4.5.4.2 coupling reamed and pairings is close to the diameter of bolt bearing good hinge holes, dressed with a good two coupling bolts before you can move the rotor, boring-reaming hole in turn. Coupling bolts must be tight coupling is symmetrical diameter, in boring, reaming, two bolts out. Well boring, hinge bolt hole flange with coupling of vertical, not oblique. Due to the coupling bolts in accordance with hinge holes corresponding to the diameter of the screw holes one by one after processing, processing back bolt installation location cannot be changed, so according to bolt after the actual weight differ