第5课时 三位两位数笔算乘法(进位)陶琴.docVIP

三位数乘两位数笔算乘法（进位） 教学内容： 青岛版小学数学四年级上册37页 信息窗3第1课时 教学目标 1.学生经历探索三位数乘两位数计算方法的过程，掌握三位数乘两位数的笔算方法。 2运用已有知识解决新的计算问题的体会，感受数学知识和方法的内在联系。 3学生在自主探索，合作交流中体验成功的愉悦，进一步树立学习数学的自信心，发展对数学的积极情感。 重点探索三位数乘两位数计算方法的过程，掌握三位数乘两位数的笔算方法。 点理解用两位数哪一位上的数去乘，乘得的数的末位就和那一位对齐教具出示信息窗3的情境出示信息窗3的情境 2．教师和学生交流信息窗的信息一期15个月，平均每月修二期12个月，平均每月修。．根据信息窗的信息，你能提出什么数学问题？ 师引导学生提出有价值的问题，解决不了的，放入问题口袋。板书：高速公路一期工程全长多少米？ 高速公路一期工程全长多少米？ 师，放入问题口袋。 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 firep