挖泥船维修吊机析报告2.docVIP

图87上、下油缸臂Mises应力云图The Mises stress contour of the main jib cylinder and the knuckle jib cylinder 5.2.3 支座反力Reaction force 对于有限元模型的中枢底部截面，得到的主要反力大小为： As to the finite element of the king structure, the major forces are: 力矩：167.41tm Moment: 167.41tm 竖向反力：34.43t Vertical reaction force: 34.43t 水平反力：0 Vertical reaction force: 0t 5.2.4 副臂架The knuckle jib 副臂架的受力情况如图-图所示。 The stress of the knuckle jib are shown in Figure - Figure 91. 副臂架的最大Mises应力约为MPa，在上油缸臂拐角处。 The maximum stress appears the inner corner of the knuckle jib, and the Mises stress is about 78.4Mpa. 在处，当底板加强以后，应力大值将出现在。 When the