TD系列液压管连接示意图.doc

TD系列拖拉机—非驾驶室机型带阀 液压管路安装工艺 将液压阀安装到立柱上。 将液压阀的进油口P、出油口T、压力输出口Ps分别与拖拉机的液压管路连接。 液压阀结构简图 将液压阀的工作油口分别与前装载机的动臂油管连接。将保护套颜色相同的油管与油口相连。 TD系列拖拉机—驾驶室机型 带阀 液压管路安装工艺 将液压阀安装到立柱上。 将操纵手柄拉线从液压阀上卸下，图中A处所示。 在拖拉机驾驶室内底板上打直径40mm孔，将操纵手柄拉线从孔中穿过。 在驾驶室内挡泥板上钻四个安装孔（直径9mm），将操纵手柄用螺栓固定在挡泥板上。 将拉线安装到液压阀。 将液压阀的进油口P、出油口T、压力输出口Ps分别与拖拉机的液压管路连接。 液压阀结构简图 将液压阀的工作油口分别与前装载机的动臂油管连接。将保护套颜色相同的油管与油口相连。 TD系列拖拉机—普通前装载不带阀 液压管路安装工艺 将液压油管连接到拖拉机多路阀，相同字母的油管与快换接头连接。 动臂装好后，将动臂油管与立柱接头连接，相同字母的油管与快换接头连接。 the drawings, first to become familiar with the drawings, mainly about the following aspects: 1) pages of drawings and diagrams, maps; 2) a comprehensive understanding of drawing; 3) finding of design-driven dimensions (), do not resize and adjust the size; 4) questioned the drawings; 5) develop buries a construction programme and technical clarification; 6) clear corners and special treatment; 7) controlled construction drawings to verify construction scheme and design. (2) at the construction site to find subject planted area: various engineering, first on the scene to find planted area, it must first understand the curtain wall installation section, and some projects are all curtain wall, the entire project is a region-wide, only partial walls, the zone is local. (3) identify the axis positioning: positioning the drawings shown in axis compared with the actual construction site to find out exactly where the axis positioning, axis positioning function are: 1) to help determine the origin of curtain walls; 2) acceptance of the installation is accurate; 3) adjust errors, and determine the error range. (4) find anchor points: according to site to find the exact location of the axis, according to the drawings provided by the content determine the positioning point; number of anchor points shall n