PS简单几步去照片中的多余人物.docVIP

大家可能都有这样的经历，假日出去旅游，在一个角度非常好的景点拍照，由于人多，拍出来的照片里面有很多不相干的人，虽然没有大碍，不过面对不认识的人进入自己拍照的照片，总不如自己和景物单独的合影好。原图如下：修改后的图片如下：Photoshop cs5出版后，抹除照片中不需要的人或者物体，变得很轻松。处理过的照片就好像原来就没有这些多余的人或物一样。网上有很多此类教程，我这里结合自己拍摄的照片，尽量给大家说一个简便的方法。具体操作步骤如下：使用PS cs5打开原图，在图层中复制图层（快捷键Ctrl+J),见下图：???????? 1、复制图层是使用Ps必须养成的习惯，希望使用者记住。下面的持有操作都是在图层1上操作。??2、使用PS左边工具箱中的自由钢笔工具把不需要的人的轮廓画出来，尽量变成一个封闭的图形（当然你也可以使用魔棒、快速选择工具或者磁性套索工具等选择工具，但是工具我的比较，没有钢笔工具在选取的时候方便）。3、然后展开PS右边的路径窗口。点击路径窗口下面的第三个按钮，把路径转换为选区：4、点击PS的编辑--填充：5、在弹出的窗口里面选择内容识别，见下图6、点击确定后，喝口水，感受一下你的电脑的速度，结果如下：7、点击PS菜单栏里面的选择--取消选择（快捷键是Ctrl+D)，取消选区，然后把上图阴影部分和不满意的部分，重复上面的步骤。最后合并图层，最后得到的结果图： spacing of 100mm. C, line line line nearby. D, spare wire unified terminal strip Terminal (terminal strip at the top of the vertical, horizontal terminal strip from the harness to Terminal Pai end at the beginning), length to ensure as far as Terminal and set aside. After e, form a wire harness, cable, line. When the line should be in the core wire for better identification and marking on the cards will be prepared in advance, alternate core core content for the cable numbering. F, finish line, according to the corresponding terminal locations, wire one by one from the bunch out, pulling line, should be kept parallel to each other and more. Core dark as possible, determined in accordance with specific conditions, it is required that: neat, beautiful, shapely, pleasing to the eye. 7.6.2 wiring technology, out of the core wire according to Terminal position, cut off the excess, with wire stripping pliers or electrician knife stripped of insulation, so that connection. Stripping should not damage the copper core. B, core wire on the oxide and chip-insulated electricians knife scrape. C, core processing has been completed, thread round long nose pliers in a clockwise direction. Circle with the screw in the direction of spin in the same direction, circle should be appropriate, it is best to slightly larger than the screws, bent round the circle and