【无限互联学员品】开源类PSCollectionView瀑布流的实现.docVIP

开源类PSCollectionView瀑布流的实现 PSCollectionView是一个使用UIScrollVew做容器，每一列的宽度固定高度可变。其用法简单，属于较为简洁的开源类。其效果图如下： 它的用法类似于UITableView。 1.首先创建PSCollectionView对象，并对其属性赋值，设置代理： 2.添加header,footer,empty,loader等视图 3. 实现其代理的协议方法，设置单元格的个数，单元格的点击事件，单元格的创建等： PSCollectionView实现的基本原理 ● 根据列数固定，为每列数存储一个当前列的高度值 ●插入数据块时在当前列原有的高度上插入。然后更新当前列的高度为原有高度加上插入的高度。重复至所有数据都插入完毕 ●调整容器的高度为各列的最大高度 PSCollectionView的点击事件 此类是在其内部定义了一个的子类PSCollectionViewTapGestureRecognizer来检测单元格数据块的点击操作 。 手势检测点击时会向他的协议方法询问此点击是否可以接受，如果手势对象是PSCollectionViewTapGestureRecognizer类型，则我们添加进去，设置为单元格可见，若不可见，则忽略掉。如果手势对象不是PSCollectionViewTapGestureRecognizer类型，则一直返回YES。 当检测到点击操作时调用协议方 此类型还设有重用单元格视图机制 spacing of 100mm. C, line line line nearby. D, spare wire unified terminal strip Terminal (terminal strip at the top of the vertical, horizontal terminal strip from the harness to Terminal Pai end at the beginning), length to ensure as far as Terminal and set aside. After e, form a wire harness, cable, line. When the line should be in the core wire for better identification and marking on the cards will be prepared in advance, alternate core core content for the cable numbering. F, finish line, according to the corresponding terminal locations, wire one by one from the bunch out, pulling line, should be kept parallel to each other and more. Core dark as possible, determined in accordance with specific conditions, it is required that: neat, beautiful, shapely, pleasing to the eye. 7.6.2 wiring technology, out of the core wire according to Terminal position, cut off the excess, with wire stripping pliers or electrician knife stripped of insulation, so that connection. Stripping should not damage the copper core. B, core wire on the oxide and chip-insulated electricians knife scrape. C, core processing has been completed, thread round long nose pliers in a clockwise direction. Circle with the screw in the direction of spin in the same direction, circle should be appropriate, it is best to slightly larger than the screws, bent