linux打开telnet端口.docVIP

linux打开telnet端口 远程TELNET登录需要主机打开23端口。方法如下：sudo nc -lp 23 （打开23端口，即telnet）netstat -an | grep 23 （查看是否打开23端口）验证为OK即通过。可以从其它环境中通过telnet来登录终端了。========================以上的方法好像不大行。附另一方法。1. sudo apt-get install xinetd telnetd ? 2. 安装成功后，系统也会有相应提示： ? sudo vi /etc/inetd.conf并加入以下一行 telnet stream tcp nowait telnetd /usr/sbin/tcpd /usr/sbin/in.telnetd ? 3. sudo vi /etc/xinetd.conf并加入以下内容： ? # Simple configuration file for xinetd # # Some defaults, and include /etc/xinetd.d/ defaults { # Please note that you need a log_type line to be able to use log_on_success # and log_on_failure. The default is the following : # log_type = SYSLOG daemon info instances = 60 log_type = SYSLOG authpriv log_on_success = HOST PID log_on_failure = HOST cps = 25 30 } includedir /etc/xinetd.d ? 4. sudo vi /etc/xinetd.d/telnet并加入以下内容： ? # default: on # description: The telnet server serves telnet sessions; it uses \ # unencrypted username/password pairs for authentication. service telnet { disable = no flags = REUSE socket_type = stream wait = no user = root server = /usr/sbin/in.telnetd log_on_failure = USERID } ? 5. 重启机器或重启网络服务sudo /etc/init.d/xinetd restart ? 6. 使用TELNET客户端远程登录即可进行非root用户访问。 ? 7.使用root登录： ? mv /etc/securetty /etc/securetty.bak 这样root可以登录了。也可这样: ? 修改/etc/pam.d/login这个文件。只需将下面一行注释掉即可。 ? #auth required lib/security/pam_securetty.so ? 8. 具体配制/etc/xinetd.d/telnet ? service telnet { disable =no bind =192.168.1.2 only_from=192.168.1.0/24 #上面这两行说明仅提供内部网段！ Instance =UNLIMITED Nice =0 Flags =REUSE socket_type=stream wait =no user =root #server =/usr/sbin/telnetd server =/usr/sbin/in.telnetd server_args =-a none log_on_failure =USERID } service telnet { disable =no bind =140.116.142.196 only_from=140.116.0.0/16 no_access=140.116.32.{10,26} #上面三行设置外部较为严格的限制 instance =10 umask =022 nice =10 flags =REUSE socket_type=stream wait =no user =root #server =/usr/sbin/telnetd server =/usr/sbin/in.telnetd log_on