PortFlowBenchTestParameters气道试验测量参数.docVIP

Port Flow Bench Test Parameters 气道试验测量参数 2010-11-28 05:04:55 View:165 Step1?步骤1?Confirm?pressure?drop?used?during?flow?bench?test?and?Re?Number确认气道测试过程中使用的压差和雷诺数?Ideal?gas?velocity?at?valve?head?在气门处的理想气体流速?Ideal?gas?velocity?can?be?calcul Step1 步骤1 Confirm pressure drop used during flow bench test and Re Number 确认气道测试过程中使用的压差和雷诺数 Ideal gas velocity at valve head 在气门处的理想气体流速 Ideal gas velocity can be calculated based on pressure drop 可根据气道压差确认理想气体流速 Step2 步骤2 X axle X轴 Valve lift/Inner seat diameter. E.g 8mm/24mm 气门升程/气门座内直径，例如8毫米/24毫米 Y axle Y 轴 Flow Coefficient at high valve lift 大升