砂浆薄涂1.0m施工方案.docVIP

施工方案 （一）目的 贵公司施工环氧树脂砂浆薄涂1-3 mm地坪地坪 滚面耐压砂浆型环氧地坪技术指标 项　　目 指　　标 表干时间（h） ≤2 实干时间（h） ≤24 适用期 (h) 5 耐冲击性(1kg/100cm) 涂层无裂纹、剥落及明显变形 附着力（划格间距1mm,级) ≤1 铅笔硬度 (擦伤) ≥H 耐磨性（750g/500r, g) ≤0.040 耐水性(7d) 不起泡,不脱落,允许轻微变色 耐油性 (120＃汽油,7d) 不起泡,不脱落,允许轻微变色 耐碱性(10% NaOH,48h) 不起泡,不脱落,允许轻微变色 耐酸性(10% H2SO4,48h) 不起泡,不脱落,允许轻微变色 耐盐水性(３％NaCl,7d)　 不起泡,不脱落,允许轻微变色 粘接强度/Mpa ≥3.0 抗压强度/Mpa ≥80 ? 施工工艺：mm厚地坪方案： （基面处理+环氧底漆+环氧砂浆层+腻子层+面涂层。） 环氧树脂砂浆薄涂mm厚施工工序： 基层处理，对原有地面打磨除尘处理、修补原有地面破损处，使地面平整，如有油漆、蜡、溶胶漆、油渍等残留物，采用特殊清洗溶剂或打磨处理， 涂装环氧底漆，以镘刀镘涂施工，要求涂装均匀、无漏涂，使底漆渗透到地面，与地面整体粘结，形成整体， 环氧中涂层，待环氧底漆层材料固化干以后，后用调配好的环氧树脂中涂层材料均匀的施工于环氧底漆上面， 腻子层，待环氧中涂层材料固化干以后，后施工环氧腻子层材料， 面涂层，在腻子层固化干以后，在确认材料无误后进行滚涂环氧树脂面涂层材料，要求均匀，无堆积，并处理好接缝处， 工艺图示： 地坪 ocusing on ways and means of improving and upgrading work, further development of three to split. (A) fully grasp no unauthorised created. The township no unauthorised created the existing building one household, one document survey and file storage work must be unconditional and full coverage. Main corridor leading to the town (road, river) village, the Central built-up area of the town on both sides must be to create a no unauthorised village. According to five hundred villages created and shanty towns, villages, old houses, reconstruction of old plant, expand create, upgrading creates files, the real no unauthorised village created into the benefit of the people of very good thing. (B) to strictly manage count as unauthorised controls. Promoting the new control work to move the center of gravity, management measures to the front, and earnestly pipes effectively. A strict new unauthorised network responsibility. Sectors such as land, housing and basic stations (stations) and the Township of grid accountability mechanisms must be strictly in accordance with the new regulatory requirements, effective implementation of the area of responsibility of the new inspections, suppression, demolition work to ensure that the new zero tolerance. Second, public s