做低碳生活的领者-自制12V直流LED照明灯.docVIP

自制220V交流12V直流LED照明灯：选择LEDLED要选用高亮度的，散光的要亮度1200mcd以上，角度要120度，聚光型的要亮度在20000mcd以上的。电压3.0-3.6v电流20mA.一般的LED的脚都很长的，为了方便焊接先用尖嘴钳或斜口钳预剪脚留有3mm的引脚就可以了。 直流12VLED灯线路图 此文有部分是学习网上的现成经经验。自己动脑、动手体验低碳生活，得到了不少乐趣。其原理和制作过程如下： 1.安装LED:将电路板安装面朝上，将LED极性方向放好，注重长脚是正极，短脚是负极，草帽型的帽沿有平面的是负极圆的一面的是正极，切勿装反因为LED是单向导电性而此电路采用的是串联电路，只要有一只装反整组灯就不会亮。 焊接： 装好了LED后将电路板焊接面朝上就可以进行焊接了，焊接要用30W的烙铁并接地线，，焊接温度控制在240度以内，时间不能超过2秒。焊好后再用指甲剪修掉长出的引脚。这样灯板就算组装完成了。（图）图 图 图 图 图 图 图 图 图 图 图 图 图 图 图 综合的使用效果，显著不错。这是一个电源点了3盏灯。按理论算法一个5W的电源，可安装这样的灯15盏。 图 做低碳生活的领跑者 school)], 4 4 house building as well as more than 1000 copies of books, more than 10 kinds of collection of newspapers and magazines, fires burnt down. In 1938, the Japanese learned that the national Government established in XI Tang Tomb rotten clip taxes, tax officers live in 8 of Yan Dong village farmers home, troops at night, Yao was burned several houses. 1938 new morning of September 18, the Japanese team went to the countryside sweep from the kaiyang village line to Tung Yang Jia Qiao yan Temple wall and met Yang Jia溇 Zhou Dana (male) weeks because of long-term illness and cant work in the fields, the Japanese see his face from scratch without calluses, regard him as Shina, thrust a knife at the scene of his death. The body was stabbed 7 times, wound 13. The same day, Trang bang village heard the Japanese come to mop-up are hiding, mother of 9 Zhou Guanbao Zhang Aying to drill a dry mound, was discovered by the Japanese, a shot in the end. The same day, is 7 zhouhaijiangzhi grandfather Zhou Yingbao to escape the Japanese army, was found on the road, a shot in the end. In March 1939, the Japanese army in Yan Tomb raiding, has arrested 16 people, in fengqiao cigarettes this morning bang, killing 11 people on the River, East meeting point in wood qiaotu in the afternoon killing 4 people on the Riverside. Gu Tong is a Japanese go speak the Shanghai dialect, later to be called Gu Tong as kill left. On January 18, 1943, the elves, five thou