华为S5624心交换机设制流程.docVIP

#Jan 2 13:39:50:436 2006 Quidway L2INF/2/PORT LINK STATUS CHANGE:- 1 - Trap 1.3.6.1.6.3.1.1.5.3: portIndex is 4227649, ifAdminStatus is 1, ifOperStatu s is 2 %Jan 2 13:39:50:631 2006 Quidway L2INF/5/PORT LINK STATUS CHANGE:- 1 - GigabitEthernet1/0/4: is DOWN [Quidway]ping 192.168.1.254 PING 192.168.1.254: 56 data bytes, press CTRL_C to break Request time out Request time out Request time out Request time out Request time out --- 192.168.1.254 ping statistics --- 5 packet(s) transmitted 0 packet(s) received 100.00% packet loss [Quidway]ping 192.168.1.254 PING 192.168.1.254: 56 data bytes, press CTRL_C to break Request time out Request time out --- 192.168.1.254 ping statistics --- 3 packet(s) transmitted 0 packet(s) received 100.00% packet loss [Quidway]int vlan 1 [Quidway-Vlan-interface1] %Jan 2 13:40:51:143 2006 Quidway L2INF/5/VLANIF LINK STATUS CHANGE:- 1 - Vlan-interface1: is UP [Quidway-Vlan-interface1]ip add 192.168.1.1 255.255.255.0 [Quidway-Vlan-interface1] %Jan 2 13:41:00:646 2006 Quidway IFNET/5/UPDOWN:- 1 -Line protocol on the inter face Vlan-interface1 is UP [Quidway-Vlan-interface1] [Quidway-Vlan-interface1]quit [Quidway]ping 192.168.1.254 PING 192.168.1.254: 56 data bytes, press CTRL_C to break Request time out Request time out Request time out Request time out Request time out --- 192.168.1.254 ping statistics --- 5 packet(s) transmitted 0 packet(s) received 100.00% packet loss [Quidway]quit Quidwaysave The configuration will be written to the device. Are you sure?[Y/N]y Please input the file name(*.cfg)(Input enter key when using startup saved-configuration file): Now saving current configuration to the device. Saving configuration. Please wait... ........ Unit1 save configuration flash:/vrpcfg.cfg successfully Quidway %Jan 2 13:42:02:448 2006 Quidway CFM/3/CFM_LOG:- 1 -Unit1 save configuration su ccessfully. Quidwaypin