吊装区变压器防火隔离措施.docVIP

吊装区变压器防火隔离措施 变压器油循环施工时尽量避免在该区域进行动火作业；油漆工作时，严禁靠近电、火焊等有明火的施工区域，办理《动火作业票》，必须采取隔离措施，并设专人监护。雪融后在材料运输前，应检查道路情况是否坚实、平整、畅通，以防因道路坍塌、路面下陷造成事故。起重及运输电气设备，起重机停放或行使时，其车轮、支腿或履带的前端或外侧与沟、坑边缘的距离不得小于沟、坑深度的1.2倍。 Transformer oil recycling construction to avoid conduct hot work in the area; Paint job, it is strictly prohibited near open flames, such as electric and HuoHan construction areas, to deal with the hot work ticket, quarantine measures must be taken, and supervision by designated personnel. After the snow melt before the material transportation, should check whether solid, evenness and smooth traffic, road conditions in case of accidents due to road collapse, surface subsidence. Lifting and transportation of electrical equipment, crane parked or exercise, its wheels, the front end of the leg or crawler or lateral and distance should not be less than groove on the edge of the ditches, pits and pit depth of 1.2 times. 作业时，起重机应置于平坦，坚实的地面上，吊臂及吊物的下方严禁站人，应在吊装区域拉设警戒线，避免无关人员进入。油箱或容器内的油料、油漆、稀料等冻结时，应采用热水或蒸汽化冻，严禁用火烤化。 Operation, the crane should be placed in a smooth, solid ground, down to the bottom of the crane jib and hanging it is strictly prohibited standing people, should be in the region of the hoisting picket, prevent irrelevant personnel to enter. Tank or container of oil, paint, thinners etc to freeze, thaw should use hot water or steam, it is forbidden to use fire melting. 氧气、乙炔软管冻结或堵塞时，严禁用氧气吹通或用火烘烤：氧气、乙炔瓶瓶阀冻结时，严禁用火烘烤，以免发生爆炸事故。可用浸40℃热水的棉布盖上使其缓慢解冻。对于加热器等取暖设备要做好检查维护工作，保证随时能够投入正常的使用。 Oxygen and acetylene hose freeze or jams, absolutely use oxygen blowing or roasted with fire: when oxygen, acetylene cylinder cylinder valves is frozen, it is forbidden to use fire baking, so as to avoid explosion accidents. Available 40 ℃ hot water soak cotton cover makes it slow thawing. For heater heating equipment such as to check the maintenance work, ensure that can be put into normal use at any time. 存放此种设备的地点也要相应的具备采暖设备。对于比较精密的仪器设备，要采取特殊的具体的保暖保护措施与方法，做好防潮、防冻工作，防止重要仪器与设备的不必要的损坏。根据公司相关规定，要杜绝任