STC12单片机温度检测与报警.docVIP

STC12单片机温度检测与报警 #include stc12c5a60s2.h #include intrins.h #define uint unsigned int #define uchar unsigned char sbit psb=P2^1; sbit cs=P2^4; sbit sid=P2^5; sbit sclk=P2^6; sbit led0=P2^7; sbit sda=P3^7; sbit scl=P3^6; sbit war=P3^5; uchar disp[3]; //数据处理结果存放 uchar show[8]={0x41,0x42,0x43,0x44,0x45,0x46,0x47,0x48}; //ABCDEFGH uchar address[8]={0x80,0x84,0x90,0x94,0x88,0x8c,0x98,0x9c}; //每一路温度显示起始地址 uchar code ch[]={0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f}; //AD通道选择 uchar code p1asf[]={0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80}; //P1ASF / AD通道选择 uchar code a1[]=温度范围设置; uchar code a2[]={入口密码：}; uchar code a3[]={通道号：}; uchar code a4[]={温度范围：}; uchar code a5[]={警告!}; uchar code a6[]={密码输入错误}; uchar code a7[]={输入密码：}; uchar code a8[]={****************}; uchar code a9[]=请选择:; uchar code a10[]=1-; uchar code a11[]=2-; uchar code a12[]=设定温度上限; uchar code a13[]=修改密码; uchar code a14[]=通道选择0-7; uchar code a15[]=上限值:; uchar code a16[]=整体修改上限; uchar code a17[]=单一修改上限; uchar code a18[]=上限值:; uchar code a19[]=新密码：; void command_dat(uchar choose,uchar date); //12864写数据，写指令 void delay(uint t); //延时 void init(); //AD初始化 void lcd_init(); // 12864初始化 void display(uchar *adess,uchar *sow); // 显示 uchar admax(uchar k); // AD八路转换结果 void time_pros(uchar k); // 数据处理 uchar key(); // 按键 void write(uchar number,uchar address,uchar *p);/// 写 void warm(); //警告 void write_dat(uchar number,uchar address,uchar ppp); void panduan_in_mima(); void temp_revise(); void up_temp(uchar ppt); void up_temp_all(); void xiugai_mima(); void start_24(void); void over_24(void); void ask_24(void); void asknot_24(void); void write_byte_24(uint dat); uint read_byte_24(void); void delaymm(void); void inct(void); void write_24(uchar add,uint dat); //24C02写函数 uint read_24(uchar add); //24C02读函数 void main() { init(); lcd_init(); while(1) { display(address,show); delay(2000); } } /*------------------------