1253C中英说明书精选.docVIP

1253C泵控说明书 Content 目录 Scope应用场合 This specification specifies the Curtis 1253C motor speed controllers which are designed for series pump motors. Its typical applications include the hydraulic systems of material handling vehicles and other industrial vehicles. SHINGKO 1253C 电机速度控制器是为串励泵控电机而设计的。广泛应用于液压系统的重型托盘车和其它工业车辆。 Description 概述 1253C offers smooth, silent, cost effective motor speed and torque control according to the signals of lifting, tilt, power steering, sideward move (forward move). They will prolong the life of the motors, contactors, batteries and reduce maintenances of the systems as it greatly reduces high current impact. The output PWM can be programmed with speed select inputs SS1-SS4 and analog throttle input. So the 1253C controllers can ensure not only the lifting speed control but also the system stability and safety. These controllers are fully programmable by means of the 1311 programmer, with diagnostic and test capability. System status can also be indicated via an external LED. The 1253C controllers have completely protection functions such as current limit, reverse polarity protection, startup lockout, over voltage protection, low voltage protection, and so on. They can provide lift lockout function with Curtis meters (such as 906, 803, ENGAGE Ⅳ) when battery is deep discharger. CAN communication feature is added to the 1253C, so it can work with other CAN devices such as CAN tiller head which will greatly simplify the wiring. 1253C 根据上升、下降、转向、前进信号提供了平稳、安静、有效的电机速度和扭矩控制。它将延长电机、接触器、电池的使用寿命和减少系统的维护以及大大减小大电流的影响。 PWM输出可以通过选择输入SS1-SS4 对速度编程，与加速器输入类似。因此1253C控制器不仅能确保上升速度控制而且保证了系统的稳定和安全。这些控制器都完全可以通过1311手持编程器编程、诊断和性能测试。系统状态也可以通过外部LED来指示。 1253C控制器有完整的保护功能例如限流、反向极性保护、启动锁止、过压保护、欠压保护等等。它可以使用SHINGKO电量表（例如906、803、ENGAGE Ⅳ）提供上升锁止功能当电池深度放电时。 1253C 增加了CAN总线通讯功能，因此它可以与其它CAN总线设备工作，例如CAN总线操纵杆它将大大简化了接线。 Encodement命名规则 4.1 Model No: 1253C AB CD