一般3D模具的制流程及规则.docVIP

一般3D模具的制作流程及规则 这是精雕行业滴塑模的一种，我们公司叫它3D模具。它主要适用于面积小 有样板 需胶粘一次成型的服装 手套行业。下面我们简单阐述它的制作流程及必要的制作规则： 1首先把带有TPR图案的样板摆放整齐，手套左右手需对称（字母除外）。然后整体镜像。例如图（1） 2扩缩出图案或字母部位0.5MM的底层边界和0.8MM宽的胶墙，具体尺寸如图（2）所标： 3随后便可生成路径了。依次的铣削深度为：整体大面[平底]-6mm铣削0.5mm深,打平和留出布料余量 图案外再刻下去1MM身 具体参数如图： 需要注意的是 胶墙外用表面雕刻效果 4图案底层刻0.7MM 如图： 字母图案再刻0.8MM深 如图： 5至此基本就做完了 再有就是 用适当的小刀把客户型号和SIZE刻0.2深 最后再切板 如图： 6到次我们的3D板就做好了，请看一下模拟雕刻出的效果图： 7最后再注明一点，在摆样板时要将两个样板之间留出8MM的裁料余量。并且样板和外边框之间也要留出8MM的裁料余量。在输出路径之前要按最外边框外扩15MM的对板线，输出原点按路径左下角输出。 北京精雕精华群 亮仔 07-10-11 guide sex further enhanced, documents handle and running of speed obviously speed up, program gradually specification, conference service and Chief reception of quality and level has has new of improve, Logistics support capability further strengthened. 　　Document management, confidential, confidentiality, duty, letters and other items have been significantly improved. 4, Office construction increased at all levels. City Government offices adhere to strengthen and improve the construction of the system as a breakthrough, has developed a series of code of conduct, continuous improvement of operational mechanism, sound and the implementation of the rules and regulations, and adhere to the system of managing people, according to the rules, the work gradually into the orbit of institutionalization and standardization. 　　Focus on strengthening ideological and political construction of the contingent of cadres, and actively carried out various business training, knowledge of the Office team structure has been optimized, to broaden the range of knowledge and operational capacity grows, nurtured a political firm, sharp, professional and innovative staff, created solidarity, striving for the top, pragmatic, dedication, good image. However, with the State Council and the provincial Government of the national, the provinces Secretary-General meeting of governm