GRR and Kappa V01.pptVIP

P Quanta Confidential QUANTA WBU Quanta Confidential QUANTA MQC * Quanta Confidential QUANTA WBU Quanta Confidential QUANTA MQC G RR and Kappa G RR and Kappa Edison.WangG RR G RR and Kappa 1.G RR introduction 2.G RR flow chart 3.G RR attention 4.G RR improve guideline 5.G RR materials contents G RR G RR introduction Definition ( 定義 ) GRR Gauge Repeatability and Reproducibility GRR is the analysis and evaluation of measurement system on precision GRR是針對度量系統在精確度上的分析和評估 Accuracy 精確度 The difference between the observed average of measurements and the true average of the same measurements . 平均量測值和真實平均值之差距.(使用最高精確度之測量儀器來量測真實平均值) Repeatability 可重復性 The amount of variation in the gauge when the same parts and part characteristics are measured several times by the same person. 當相同人員多次測量相同物 品和物品特性，所得到量測 變異的總量 G RR introduction Reproducibility 再現性 The amount of variation in the average of the measurements when different people use the same gauge on the same parts and part characteristics. 當不同人員使用相同量 規來測量 相同物品和物 品特性，所得到量測變異 的總量 G RR introduction G RR introduction EV=K1*(RA+RB+RC)/3 EV%=100%* EV MAX-MIN R 极差 T 次数 K1=3.05 (t=3) K2=2.70 (t=3) AV=SQRT[K2*(XMAX-XMIN)2-EV2/(n*T)] AV%=100%* AV MAX-MIN G RR introduction RR=SQRT(EV2+AV2) RR%=SQRT(EV%2+AV%2) G RR Flow chart FLOW CHART G RR Flow chart preparation 準備 ? Number of inspectors : 檢查員的個數 ? 3 inspectors.( Prior gauge capability is unknown) 3個檢查員(預先的量規能力未知) ? 2 inspectors.( GRR20% in prior gauge capability) 2個檢查員(GRR20%在先前的量規能力研究) ? Number of trials : 測試的次數 ? Same as for inspectors. 與檢查員的個數相同 ? Number of parts : 零件的個數 ? 10 pieces(usually) or 5 pieces. 通常使用10個零件或5個零件