GSD.pptVIP

Copyright DASSAULT SYSTEMES 2002 Generative Shape Design 进入操作界面 GSD 概述 Generative Shape Design (1/2) Generative Shape Design (2/2) Terminology WFS 与 GSD 比较 创建极值点 创建极值点 创建曲线连接 ：Normal 类型 Creating a Connect Curve (2/3): Normal Type Creating a Connect Curve (3/3): Normal Type 创建曲线连接 ：参考曲线类型 创建 Spine 线 在平面和曲线之间创建中心线 创建平行曲线 创建表面 主要包括 ： Why Do You Need Surfaces WFS Surfaces versus GSD Surfaces Review of WFS Surfaces Creating a Swept Surface Creating an Adaptative Swept Surface To Sum Up Creating Explicit Type Swept Surfaces Creating an Explicit-type Swept Surface (1/7) Creating Line Type Swept Surfaces Creating a Line-type Swept Surface : Two Limits Creating a Line-type Swept Surface : Tangency Surface Creating Circle Type Swept Surfaces Creating a Circle-type Swept Surface : Two Guides and Radius Joining Elements Healing Surfaces (1/3) Smoothing Curves (1/2) Smoothing Curves (2/2) Extracting Elements Extracting an Edge from a Surface Creating Fillets Creating an Edge Fillet Creating an Edge Fillet (1/2) Creating an Edge Fillet (2/2) Creating a Variable Radius Fillet Creating a Variable Fillet (1/3) Creating a Variable Fillet (2/3) Creating a Face-To-Face Fillet Creating a Tri-Tangent Fillet Filleting is an operation that is used to smoothly connect surfaces. You will learn how to create Shape, Edge, Variable, Face-To-Face, and Tri-Tangent Fillets You will learn how to create Fillets on the sharp edges of a surface. 1 2 Select the Edge Fillet Icon Select one or more internal edges of a surface Use these command to provide a transitional surface along a sharp internal edge of a surface You can control the Extremities of the Fillet the same way as for the Shape Fillet 3 Enter the Radius value. You can also fillet an entire face Choose a Propagation type : 4 Click OK to confirm. The Edge Fillet is added to the specification tree 5 If Minimal, only the selected edges will be filleted. If Tangency, all edges tangent to the selected edges will also be filleted. Yo