afp-400.pptVIP

AFP-400 Fire Alarm Control Panel Key AFP-400 Features 2 intelligent addressable loops 396 intelligent points 198 detectors Ion, Photo, Thermal, Duct 198 modules Pull, Call Point, Relay, or Signal 64 panel output circuits Built-in circuits 4 built-in signal circuits, 4 relays Optional voice and telephone Color graphics option VGAS CPU-400 Microprocessor State-of-the-art RISC microprocessor Extremely fast less than 3 second response! 16-bit watchdog timer Speed comparable to a 386 class PC computer The CPU-400 Module CPU-400 Features 80-character, backlit Full QWERTY-type keypad Status LEDs AC Power, Fire Alarm, Pre-Alarm, Security, Supervisory, Trouble, Disabled Points, Alarm Silenced Switches Acknowledge, Silence, Drill, Reset, Lamp Test Slide-in LED and switches labels CPU-400 Standard Circuits EIA-232 printer port EIA-232 CRT port EIA-485 “Terminal Mode” port EIA-485 “ACS Mode” Port Two SLC loops Style 4, 6 or 7 Built-in isolators Built-in noise control circuit Up to 10,000 ft. SLC loops Up to 1,000 ft. untwisted/unshielded MPS-400 Power Supply Full 6.0 amps of power total Two non-resettable 24 VDC @ 1.25 amps One resettable 24 VDC @ 1.25 amps Four notification circuits 24 VDC @ 2.5 amps Field selectable 120 or 240 VAC 12 to 60 A.H. batteries lead acid only 4 notification circuits Class A or B Four Form-C relays Alarm, Trouble, Supervisory, Security Option - Convert supervisory and security to alarm The MPS-400 Panel Option Modules Up to 8 modules Each with an expander Supports: ICM and ICE module VCM and VCE module CRM and CRE module Green on /Yellow trouble Switch control Slide-in circuit labels The ICM/ICE Module 4 circuits Class A or B Expand to 8 Class A or B Notification or releasing Slide-in circuit label Green on/Yellow trouble Switch control of circuit Fully programmable The CRM/CRE Module 4 Form-C relays 5.0 amps Expand to 8 relays Supports ARM 10/20 amp Slide-in circuit label Green on LEDs Switch control of circuit Fully prog