网络流量测量软件的设计与实现.docVIP

密级： 学 士 学 位 论 文 THESIS OF BACHELOR 题 目 网络流量测量软件的设计与实现 学 院： 专 业： 　　计算机科学与技术 　 班 级： 　　　　 学 号： 学生姓名： 　　　 指导教师： 　　　 　 起讫日期： 　　　 　 网络流量测量软件的设计与实现 摘 要/IP协议，旨在介绍IP，TCP，UDP等比较重要的协议。主要是介绍IP头，TCP头，UDP头的特点，以便从IP头中可以获取源地址，目的地址，协议类型等信息。在随后的章节中提出了Socket的概念，Socket实际上提供了一个通信端口使所有拥有Socket的端口的计算机之间能够相互通信，在本论文中主要说明了socket的建立，监听和撤销的过程。具体到程序实现中，对网卡混杂模式的设置是通过原始套接字（raw socket）Abstract: For convenience of network programming, in the early 1990s, a new set of network programming interface using under WINDOWS was established by some companies united by Microsoft. It is known as Windows Socket Norm. It isnt a kind of network protocol, but an open network programming interface support multiple protocols under WINDOWS. The main purpose of the thesis is to introduce how to use Winsock2 program on network adapter under the protocol of TCP/IP. This is for the purpose of measure the network discharge. At the beginning of the thesis, we introduce all important protocols of TCP/IP, like IP, TCP, and UDP. We introduce IP header, TCP header and UDP header for the most important because we need acquire the information of source address, destination address, and protocol type from the IP header. In the following section, we give the concept of Socket. Sockets actually provide a communication port to allow all the computers that have Socket port to communicate with each other. In the thesis, we talk on the process of the Socket’s building listening and canceling. In the program, we use RAW Socket to set adapter on the mixed mode. To let the Socket receive all data, we also need to set the on SIO_RCVALL. Then we use the function recv () to get data pack. At last we need analyze the data pack to get the information we need. KEY WORDS：TCP/IP, Winsock，RAW SOCKET, NetBIOS 目　　录 摘　要…………………………………………………………………….1 Abstract…………………………