Iron Dextran injection 50mg2ml.docVIP

Manufacturing formula with process 1.1 Manufacturing formula Name 2ml:50mg Iron Dextran solution 10.8kg Water for injection To 10000ml 1.2 Manufacturing process Ampoules washing: Connect the electric powder, pre-h last part). Fill the water batch to the full volume with water for injectioneat the tunnel oven, and set the temperature. 3.Check the wind pressures of different places (front, middle and. 4. Low the temperature. 5. Open the valve to adjust the compressed air pressure. 6. Adjust the water pressure. 7. Adjust the circulation water pressure. 8. Adjust the air volume to take