文献检索Word 文档.docVIP

碳纳米管的研究 检索题目：纳米管的研究检索 检索时间：2010年10月20 检索地点：图书馆 一：分别用scifinder数据库和EBSCOhost数据库检索一个课题的相关文献 （一） 检索方式：Scifinder 检索词 Carbon nanotubes（碳纳米管） Bibliographic Information（文献信息） The relationship of crystallization behavior, mechanical properties, and morphology of polypropylene nanocomposite fibers. Soitong, Tawat; Pumchusak, Jantrawan. Department of Physics and Materials Science, Faculty of Science, NANOTEC Center of Excellence, Chiang Mai University, Chiang Mai, Thailand. Journal of Materials Science No pp. yet given. Publisher: Springer, CODEN: JMTSAS ISSN: 0022-2461. Journal written in English. AN 2010:1306008 CAPLUS Abstract(摘要) This study aimed at the fabrication of lightwt. and high performance nanocomposite fibers. Polypropylene/multiwalled carbon nanotubes (PP/MWCNTs) nanocomposite fibers (0-5 wt% of MWCNTs) were prepd. via melt spinning process. The MWCNTs were dispersed in the dispersing agent before mixing with PP powder. After mixing, the dispersing agent was removed. Then the nanocomposites were spun into fibers. The fibers were spun and stretched with 7.5 draw ratios. Crystn. behavior and thermal properties of PP/MWCNTs nanocomposite fibers were studied using the differential scanning calorimeter (DSC) and thermogravimetric analyzer (TGA). The DSC curves of PP/MWCNTs nanocomposite fibers showed the crystn. peak at a temp. higher than that of neat PP fibers. These results revealed that the MWCNTs acted as nucleating sites for PP crystn. The addns. of MWCNTs into PP leaded to an increase in both crystn. temp. and crystn. enthalpy. However, no significant changes in the melting temps. of the PP nanocomposites were detected. Degrdn. temp. of samples obtained from the TGA curves showed increase thermal degrdn. behavior for the PP/MWCNTs with the content of MWCNTs. It was found that the increase of tensile strength and modulus corresponded well with the increase of crystallinity of the composite fibers. （ 二） 检索方式：EBSCOhost