计算书范本.docVIP

毕业设计（论文）用纸 摘 要 本毕业设计工程是北京科技大学教学楼设计，包括建筑设计和结构设计两部分内容。  一、建筑设计是在总体规划的前提下，根据设计任务书的要求，综合考虑建筑物与周 围环境、建筑物的使用功能、流水交通及经济性等问题，依据相关设计规范来确定设计方 案，做出建筑的结构形式、建筑平面、剖面及立面设计。 二、结构设计是在建筑物初步设计的基础上确定结构方案；选择合理的结构体系；进 行结构布置，并初步估算，确定结构构件尺寸，进行结构计算。在确定框架布局之后，我 先进行了层间荷载代表值的计算,接着利用顶点位移法求出自振周期，进而按底部剪力法计 算水平荷载（地震荷载、风荷载）的作用，求出在水平荷载作用下的结构内力（弯矩、剪 力、轴力）。接着计算竖向荷载（恒载及活荷载）作用下的结构内力，并利用 Excel 表格找 出最不利的一组或几组内力组合，选取最安全的结果计算配筋。此外还进行了基础、楼板 的设计，利用 PKPM 电算软件对整体结构进行分析，并绘制相关的结构施工图. 关键词：框架结构；荷载计算；内力计算；内力组合；抗震设计；PKPM - 1 -  毕业设计（论文）用纸 Abstract This graduation design project is a Beijing university of science and technology of the building , including architecture design and structure design. 1.The architecture design is made under the premise of the overall programming, according to the request of the design mission, in addition, the building and its surroundings, usage function, the transportation and architecture economy and so on are compressively considered. And the project design according to the related design norm confirm the structural form of architecture, the design of the plan views ,the elevation views and the sectional views.. 2. The structure design is based on preliminary architecture design, to select the right structure type, precede structure arrangement and sizes of structure components to calculate. When the directions of the frames is determined, firstly the weight of each floor is calculated .Then the vibrate cycle is calculated by utilizing the peak-displacement method, then making the amount of the horizontal load force (seismic load，wind load) can be got by way of the bottom-shear force method. The force can be assigned according to the shearing stiffness of the frames of the different axis. Then the internal force (bending moment, shearing force and axial force ) in the structure under the horizontal loads can be easily calculated. After the determination of the internal force under the dead