一种高增益、低功、Rail to Rail输出的BICMOS运算放大器.docVIP

一种高增益、低功耗、Rail－to－Rail输出的BICMOS运算放大器 应建华 朱慧珍 摘要：本文介绍了一种基于0.6um BICMOS工艺，具有高增益、低功耗、Rail to Rail输出的运算放大器。使用cadence spectre仿真工具对运放进行了仿真分析，结果表明在外接10K电阻条件下该运放可达到115dB的直流开环电压增益，低至0.32mw的功耗；在100pF电容负载下，单位增益带宽为2.1MHz，相位裕度为60；同时由于使用了共模反馈结构，使得运放获得了高的电源抑制比和共模抑制比。 关键词：BICMOS；运算放大器；Rail-to-Rail；共模反馈 Abstract Based on 0.6um BICMOS technology,A high-gain operational amplifier with low-dissipation and rail-to-rail output range has been presented here.The simulation result with cadence spectre show that the dc gain of the op amp is 115dB while driving 10k,and the unity gain frequency is 2.1MHz with a phasema