于某啤酒厂废水处理工艺设计(上).doc

摘要本设计为某啤酒废水处理设计。设计程度为初步设计。啤酒废水水质的主要特点是含有大量的有机物，属高浓度有机废水，故其生化需氧量也较大。该啤酒废水处理厂的处理水量为不考虑远期发展。原污水中各项指标为：BOD浓度为mg/L，COD浓度为mg/L，SS浓度为mg/L。因该废水BOD值较大不经处理会对环境造成巨大污染，故要求处理后的排放水要严格达到国家二级排放标准即：BOD≤30mg/ L，COD≤10mg/ L，SS≤mg/ L。 经分析知该处理水质属易生物降解又无明显毒性的废水，可采用两级生物处理以使出水达标。一级处理主要采用物理法，用来去除污水中的悬浮物质和无机物。二级处理主要采用生物法包括厌氧生物处理法中的UASB法和好氧生物处理法中的SBR法，可有效去除污水中的BOD、CODeer waste water treatment process design Abstract This design is one beer wastewater treatment. The degree of the design is in a preliminary phase. The main distinguishing feature of the beer waste water is that it contains the massive organic matters, so it belongs to the high concentration organic waste water, therefore its biochemical oxygen demand is also high. The water which needs to treatment in the beer waste water treatment plant is 3000m3/d, regardless of the specified future development. Various target in the raw waste water is: the concentration of BOD is 2800mg/L, the concentration of COD is 5000mg/L, the concentration of SS is 1500mg/L. For the beer waste waters BOD is high, it could pollute the enviroment if drained before treatment, so it request the beer waste water which drained must be strictly treated to the two effluence standard in the country, which is as following: BOD≤30mg/ L, COD≤150mg/ L, SS≤150mg/ L. After the analysis, the quality of this processing water belongs to the waste water that easy biology degrade and not have the obvious poison, could use two levels of biological treatments to cause the water drained meet the designated standard. First level of processing mainly uses the physical methods, which removes the suspended matter and the inorganic substance in the sewage.Second levels of processing mainly uses the biology methods, consists of UASB of demand oxygen biology methods and SBR of anaerobic oxygen biology methods, which could remove BOD, CODin the waste water. The technological process of this design is Key words: 绪论 研究的目的和意义 近年来，随着人民生活水平的提高，我国啤酒工业高速发展，啤酒生产厂已经发展到600多家，啤酒产量以每年35