更换磁盘主要步骤.doc

更换DF600 disk driver 登陆web console，如下： 如果磁盘故障，则磁盘位置状态呈红色。 检查错误日志： 点击导航条左侧的Reference中的warning information，需要确认： 是否有磁盘报警； 报警磁盘位置； 在Information Message中是否显示如下内容（举例说明） 12/03/2006 06:39:05 C1 I1E000 Online verify completed[odd unit] 12/03/2006 03:44:51 C0 I008HH Data recovery to spare HDU(Unit-01,HDU-13) 12/03/2006 03:44:51 C0 I151HH Data recovery completed(Unit-14,HDU-08) 12/03/2006 01:00:48 C0 I150HH Data recovery started(Unit-14,HDU-08) 12/03/2006 01:00:46 C0 W060HH HDU alarm[RK](Unit-01,HDU-13) 如果完成数据COPY到spare磁盘，可以进行磁盘更换； 佩戴防静电手环； 小心将故障位置磁盘从盘柜中拔出（故障的磁盘有红灯报警）； 等待20秒钟； 将新磁盘放入故障磁盘位置； 新磁盘被系统识别后，数据将自动从spare COPY回新磁盘； 等待数据COPY结束，设备warning灯消失； 更换完毕。 附：磁盘详细更换步骤（摘自DF600 maintenance User Guide） (1) Replacing Disk Drive CAUTION ??To prevent part failures caused by static electrical charge built up on your own body, be sure to wear a wrist strap connected to the chassis before starting (before removing bezel) and do not take it off until you finish. Please be sure to keep a wrist strap near the subsystem. ??Be sure to wear a wrist strap connected to the chassis whenever you unpack parts from a case. Otherwise, the static electrical charge on your body may damage the parts. ??Disk Drives are precision components. Be careful not to expose drives to hard shock. ??When you install a Disk Drive, support its metal part with your hand that has the wrist strap. You can discharge static electricity by touching the metal plate. NOTE : ??Back end LOOP automatic operation diagnosis is being executed, and interrupt the maintenance work even of the diagnosis end, please when “I5Y000 Obstacle HDU search start” is displayed on “Information Message” of WEB. Please restart the maintenance work after confirming diagnosi