光纤通信在配电网自动化上应用之论文.docVIP

Optical fiber communication in power distribution automation applications on paper（光纤通信在配电网自动化上的应用论文）With the development of national economy and peoples living standards improve, peoples growing demand for electricity, while the reliability and power quality of power supply put forward higher requirements. Feeder Automation is the reliability of power supply distribution network systems to improve the most direct and effective means of technology. Countries has increased in recent years on the city network and the transformation of rural power network, power supply bureaus of the major domestic investment in distribution automation is also increasing. Achieved in the distribution network automation process, we found that communication problems is a difficult problem. In this, just from the fiber-optic communication networks in automation applications with little knowledge about and experience.2 Distribution Automation requirements for communicationSCADA system with the same dispatch, distribution automation system also needs an effective communication network, and he has his own characteristics: the number of terminals very much. System has a large distribution network by opening and closing, power distribution transformers, circuit breakers column to monitor these devices requires a number of FTU and TTU, while the FTU with the power distribution equipment installation, wide geographical distribution, communication nodes scattered.Distribution automation system size, complexity and automation level of the decision of the communication system should meet the following requirements:(1) Reliability:Communications equipment distribution network systems have many exposed outdoors, bad environment, so must be able to withstand heat, cold, sun, rain, snow, hail and lightning and other natural attacks. Meanwhile, try to avoid all kinds of electromagnetic interference, to ensure long-term stable and reliable work, and asked when the line power failure, communicatio