毕业设计(论文)-基于AT89S52单片机的相位信号发生系统设计.docVIP

Abstract 摘 要 Ⅱ Ⅰ 摘 要 本设计给出了以单片机AT89S52为核心配合TI公司的DA转换器7524和优质低功耗运算放大器2335设计的相位信号发生系统，实现相位在0～359o变化，频率在1～50Hz可调(经测试可达到60Hz)。系统由单片机实现控制与显示功能，通过模数转换芯片TLC7524CN把经放大器OPA2335AID放大后的两路正弦波信号，送入示波器进行测量，测量两路信号的相位差分辨率精确到1o，并加入键盘与LED显示功能，使得系统具有智能化，人性化的特色。主要内容有系统功能和设计方案、硬件构成和软件设计过程、结合软件和硬件的调试分析设计中出现的问题和解决方案。 关键词：DA转换器 相位信号的产生 单片机 放大器 Abstract This design illustrates the signal generation system of phase position, which takes single-chip AT89S52 as the core and employs TIs DA converter 7524 and high-quality, low-power operational amplifier 2335 to realize the change of phase position between 0 o and 359 o , and the adjustibility change of frequency between 1 Hz and 50Hz (up to 60Hz after test). The controlling and displaying functions of the system are realized by the single-chip. Through the ADC chip TLC7524CN, two sine wave signals which are amplified by the amplifier OPA2335AID are sent into the oscilloscope to take the measurements. The resolution factor of the phase separation which measures two signals is accurated to 1 o. Keyboard and the display function of LED are used into this system to make it more intellifent and human. The main contents consist of system function and design, hardware constitution and software design processes, combining software and hardware design debug analysis the problems and solutions. Key words： DA Converters Generation of Phase Position Signal Singlechip Amplifier 目 录 目 录 Ⅲ 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc234150639 摘 要 PAGEREF _Toc234150639 \h I HYPERLINK \l _Toc234150640 Abstract PAGEREF _Toc234150640 \h II HYPERLINK \l _Toc234150642 第一章 绪 论 PAGEREF _Toc234150642 \h 1 HYPERLINK \l _Toc234150643 1.1课题研究的现状 PAGEREF _Toc234150643 \h 1 HYPERLINK \l _Toc234150644 1.2 课题相关概念 PAGEREF _Toc234150644 \h 2 HYPERLINK \l _Toc234150645 1.2.1 相位和相位差的概念 PAGEREF _Toc234150645 \h 2 HYPERLINK \l _Toc234150646 1.2.2 信号发生器的分类 PAGEREF _Toc234150646 \h 3 HYPERLINK \l _Toc234150647 1.2.3 信号发生器技术的发展 PAGEREF _Toc234150647 \h 4 HYPER