PD-14回柱绞车的设计.docVIP

PD-14回柱绞车的设计DESIGN OF WINCH ABOUT PD-14学生姓名 学院名称专业名称机械设计制造及其自动化指导教师摘要在国内，平均每年需求各种不同规格的矿用回柱小绞车数万台，因此，降低成本和提高安全性对回柱绞车的开发具有重要意义。包括对电动机的选择，减速器的选用，卷筒的设计和校核以及主轴的设计和校核，其它一些零件的选用和设计和对绞车的各部位的润滑。在设计过程中查阅了相关的一些资料，发现现在所做的设计是一个传统的但又是非常有实际意义的设计。文中主要阐述了绞车的发展和具体对绞车的设计和部件的选用过程。主轴的设计主要针对其在绞车上受力，通过选择材料到初步确定尺寸，再进行受力分析，最后进行校核强度等一系列的步骤来设计出符合要求的轴。由于本人时间和知识面的有限，所以设计的绞车不可能很全面。文中错误难免，望老师给于指正。关键词 绞车；减速器；主轴AbstractIn the domestic, every year we need every kind of different specification of the winch count about ten thousandth sets on average, therefore, declining the cost will be very important to the machine development . Including the motor of choice, the choice of reducer, reel in the design and verification as well as the main design and verification, some other parts of the selection and design of the winch and the various parts of lubrication. In the design process inspection of the relevant information and found that the design is now done by a traditional but a very meaningful design. In the main text of a winch on the development of the winch and specific parts of the design and selection process.  The design for the main spindle in the winch on the force, through the choice of materials to determine the initial size, to conduct Analysis, a final check of the intensity and a series of steps designed to meet the requirements of the shaft. Because of my limited time and knowledge, so the design of the winch is notcomprehensive. In the wrong inevitably, to hope the teachers can corrected.Keywords winch retarder 目 录TOC \o 1-3 \h \u HYPERLINK \l _Toc256000000 蒯珉汁荤统缔湾嵊町蒿妻昌猾 PAGEREF _Toc256000000 \h HYPERLINK \l _Toc256000001 揶祝礅涨侍蹄缴叫双髑近乘裱 PAGEREF _Toc256000001 \h HYPERLINK \l _Toc256000002 圭瘃笙怍唧慵莛钆蜗阕搽椋漏 PAGEREF _Toc256000002 \h HYPERLINK \l _Toc256000003 瑁蛊笆菜撄蛄汕淇讠读跳贝耋 PAGEREF _Toc256000003 \h HYPERLINK \l _Toc256000004 呜凯骋箝展墨鹣钱磉髭垭瘿湾 PAGEREF _Toc256000004 \h HYPERLINK \l _Toc256000005 余窭丁砼郫苑鹜翥愆骁巢执缃 PAGEREF _Toc256000005 \h HYPERL