毕业论文-作物根茬收获机总体设计.doc

题 目： 作物根茬收获机总体设计 姓 名： 班级学号： 0608054201 指导教师： 毕 业 论 文（设 计）用 纸 佳木斯大学教务处 第 PAGE II 页 摘 要 针对农作物根茬的挖掘、拣拾、清理及积聚。首先，本文提出了用箭形松土铲、钝角弯刀、离心甩刀和螺旋搅轮完成农作物根茬收获的方案；其次，建立PRO/E三维模型进行了运动仿真和动力学分析；最后，该机以5km/h的前进速度进行田间试验后，实际表明根茬漏拾率应不超过5% ,根茬破碎率不超过5%，耕作幅宽为2.1m，生产率大于13000m2 关键词： 根茬漏拾率；根茬破碎率；收集； 毕 业 论 文（设 计）用 纸 Abstract Choose ten, to check up and accumulate specifically for crops stubble excavating. The primo , the main body of a book have brought forward a knife with arrow shape ripping shovel , the obtuse angle scimitar , the centrifugation have flung and helix stir a wheel accomplishing the scheme that crops gains batch; Motion emulation and kinetic methods of analysis the secondary , building-up PRO/E 3-D model have been carried out; Reality indicates root miss and not picking up rates should not exceed 5% batch , stubble broken rate does not exceed 5% after the at last , that machine carry out a field experiment with 5 km/h make ones way speed,cultivation width 13000 m2, can for 2.1 ms , efficacy greater than the first step accomplishes the mission that crops gains batch. Be the machine applications turn to be going to certainly improve crops the efficiency collecting batch, saves large amount of rural labor. Keywords： The stubble misses and does not pick up rates; Stubble broken rate; Collect; 毕 业 论 文（设 计）用 纸 佳木斯大学教务处 第 PAGE 33 页 目 录 TOC \h \z \t 摘要,1,Abstract,1,参考文献,1,章标题,1,一级节标题,2,二级节标题,3,三级节标题,4 HYPERLINK \l _Toc264055745 摘 要 PAGEREF _Toc264055745 \h I HYPERLINK \l _Toc264055746 Abstract PAGEREF _Toc264055746 \h II HYPERLINK \l _Toc264055747 第 1 章 绪 论 PAGEREF _Toc264055747 \h 1 HYPERLINK \l _Toc264055748 第 2 章 作物根茬收获机的基本结构组成 PAGEREF _Toc264055748 \h 3 HYPERLINK \l _Toc264055749 第 3 章 作物根茬收获机传动方案的拟定 PAGEREF _Toc264055749 \h 5 HYPERLINK \l _Toc264055750 3.1 设计参数要求： PAGEREF _Toc264055750 \h 5 HYPERLINK \l _Toc264055751 3.2 方案的选择 PAGEREF _Toc264055751 \h 5 HYPER