毕业设计(论文)－基于PROTUES的数控直流源的仿真方法.docVIP

东北电力大学本科毕业设计论文 PAGE PAGE 32 PAGE 32 摘 要 近年来随着计算机在社会领域的渗透和大规模集成电路的发展，单片机的应用正在不断地走向深入，由于它具有功能强，体积小，功耗低，价格便宜，工作可靠，使用方便等特点，因此越来越广泛地应用各个领域。 本系统以 AT89S51 单片机作为系统的核心，由D/A数字模拟转换模块、按键、LED串口显示模块等模块组成一个数控电源。具体介绍应用Proteus的ISIS软件进行单片机系统的数控电源设计与仿真的实现方法。本系统由单片机程控输出数字信号，经过D/A转换器（AD0832）输出模拟量，再经过运算放大器隔离放大，控制输出功率管的基极，随着功率管基极电压的变化而输出不同的电压。仿真结果表明，本系统实际应用于需要高稳定度小功率恒压源的领域。 关键词：单片机；数控电源；D/A；直流电源；Proteus； Abstract In recent years, with computers in the infiltration and the development of large-scale integrated circuits. SCM application is steadily deepening, as it has strong function, small size, low power dissipation, low prices, reliable, easy to use features, it is particularly suited to and control of the system, increasingly widely used in various fields. The AT89S51 SCM is the heart of the NC Power,which is made up of Digital-analog converter module,key module and LED display module.Describes the application of Proteuss ISIS software of the numerical control power source to achieve the design and simulation methods in details. This system consists of microcontroller program output digital signal, through D/A converter (AD0832) output analog amplifier, through isolating amplifier output power, control of base, with the power to change the passive tube voltage output of different voltage. Test results show that this system application in need of high stability of small power constant-voltage source fields. Key words：Microcontroller ；numerical control power source；D/A；direct-current power supply Proteus； 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc264808342 摘 要 PAGEREF _Toc264808342 \h I HYPERLINK \l _Toc264808343 Abstract PAGEREF _Toc264808343 \h II HYPERLINK \l _Toc264808344 第一章 绪论 PAGEREF _Toc264808344 \h 1 HYPERLINK \l _Toc264808345 1.1课题背景和研究意义 PAGEREF _Toc264808345 \h 1 HYPERLINK \l _Toc264808346 1.2 本文研究内容 PAGEREF _Toc264808346 \h 1 HYPERLINK \l _Toc264808347 第二章 整体方案设计与主要器件选择和介绍 PAGEREF _Toc264808347 \h 3 HYPERLINK \l _Toc264808348 2.1