- 0
- 0
- 约2.69万字
- 约 44页
- 2016-11-26 发布于辽宁
- 举报
摘要
随着中国经济的迅猛发展,人民生活水平的提高,购车的家庭越来越多,私人汽车日益增多,治安状况恶化,汽车被盗对有发生,汽车的定位与防盗也成为市场的一大需求。
目前汽车防盗系统存在存在功能简单、可靠性低、误报警、报警距离短等缺点。GPS(Global Positioning System,全球卫星定位系统)提供了一种可靠有效的车辆定位方法,而利用 GSM(globalsystemformobilecommunications,全球移动通信系统)无线通信技术可将定位数据信息迅速传递到接收端,两者结合形成 GPS/GSM 车辆监控系统,为解决以上问题找到了一个很好的解决办法。如果车主有一部收发短消息的GSM手机,防盗系统就可以实现实时报警,并且GPS可确定具体车辆的方位信息,便于查找丢失的汽车。
本文在对目前各种常规汽车防盗装置的不足进行分析的基础上研究一种基于GPS/GSM的智能车辆防盗系统的软硬件设计方案及其实现。该系统由STC12C5A60S2单片机、SIM300无线模块、GPS接收机及防盗传感器等组成。微处理器对收集到的信息进行处理,确认后可锁死发动机同时向车主手机或监控中心发出信息,以实现汽车监控,防止被盗。
关键词: GSM;GPS;汽车防盗系统
Abstract
With the rapid development of Chinas economy, the improvement of peoples living standard, the principle of more and more families, private cars is growing and security situation is worse, car theft has to happen, car positioning and security has become a big market demand.
At present guard against theft system is simple and reliability have functional low, false-negatives, alarm short distance from shortcomings. GPS (global positioning system) provides a reliable and efficient vehicles positioning method, and use GSM (global system for mobile communications) wireless communication technology can will locate data information quickly passed to the receiver, both union form GPS/GSM vehicle monitoring system, to solve the above problem found a good solution. If the owner have a mobile phone short messages and send and receive the GSM, guard against theft system can realize real-time alarm, and GPS can determine the orientation of the specific vehicle information, it is easy to find the lost car.
In this paper at present various conventional lack of guard against theft system based on the analysis of the research based on GPS/GSM intelligent vehicle security system hardware and software design of the scheme and realization. The system consists of STC12C5A60S2 microcontroller, SIM300 wireless module, GPS receiver and guard against theft sensor etc. Microprocessor to collect the information processing, the engine can be confirmed at t
您可能关注的文档
- 毕业设计论文__基于dsp的图像去噪实现 .doc
- 毕业设计论文__基于dsp和以太网的数据采集系统软件设计 .doc
- 毕业设计论文__基于epon+eoc技术的三网融合业务的实现.doc
- 毕业设计论文__基于epon的ftth宽带光接入网设计.doc
- 毕业设计论文__基于fluidsim的薄板压力机控制系统仿真.doc
- 毕业设计论文__基于fluidsim的铣床装置系统仿真.doc
- 毕业设计论文__基于fpga的串口设计 .doc
- 毕业设计论文__基于fpga的串口设计 正文.doc
- 毕业设计论文__基于fpga的抢答器设计 .doc
- 毕业设计论文__基于fpga的数据采集系统电路设计.doc
原创力文档

文档评论(0)