110KV變电站一次部分的设计.docVIP

张小刚：110KV变电站一次部分设计 山西农业大学工学院毕业设计 28 - 29 - 1 - 毕业设计说明书（论文）中文摘要 110KV变电站一次部分设计 摘要 本文主要介绍了110KV降压变电站一次电路部分的设计。根据任务书中的原始数据进行了负荷分析和计算，利用计算结果，参考当地经济发展状况，确定主变压器的容量，进而选择变压器的型式，确定主变压器的型号。然后分析不同主接线的适用范围选择各电压等级的主接线方式制定主接线方案，通过比较选择最优方案，根据配电装置的适用范围选取不同电压等级的配电装置。最后，按照所选设计的方案，绘制出了110KV降压变电站的电气主接线图。本设计初步实现了对电力用户提供安全、可靠、优质电能的目的。 关键词 主接线 短路电流计算 电器设备 防雷保护 毕业设计说明书（论文）外文摘要 A part of the design of 110kV substation Abstract This article introduces the design of 110KV the step-down substation circuit .First, the primary data of the project description is analyzed, then the statistics and computation of the load are carried on. Now it is determined to select the capacity of the main transformer, the pattern and definite the model. After analyzing the applicable scope of the different host wiring , the main wiring way of the various voltage class and the main wiring plan are determined ,then choose the best though comparison .Besides, the power distribution equipment of the different voltage class is selected which based on the applicable scope of power distribution equipment. Finally, according to the selected design, drawing110kv step-down substation electrical main wiring diagram. The project is safe, reliable and quality, which achieves the requirements. Keywords Main electrical connection Short-circuit calculation Electrical equipment Lightning protection 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc15293 1 引言 PAGEREF _Toc15293 - 1 - HYPERLINK \l _Toc4842 1.1 变电站国内外发展现状 PAGEREF _Toc4842 - 1 - HYPERLINK \l _Toc26407 1.2 原始资料的分析 PAGEREF _Toc26407 - 1 - HYPERLINK \l _Toc31313 1.3 设计任务 PAGEREF _Toc31313 - 2 - HYPERLINK \l _Toc31140 2 负荷分析及无功补偿的选择 PAGEREF _Toc31140 - 2 - HYPERLINK \l _Toc22501 2.1 负荷分析 PAGEREF _Toc22501 - 2 - HYPERLINK \l _Toc21603 2.1.1负荷分类 PAGEREF _Toc21603 - 2 - HYPERLINK \l _Toc21847 2.1.2负荷资料 PAGEREF _Toc21847 - 3 - HYPERLINK \