一個基于OMRONPLC的冰箱老化测试生产线的控制系统.docVIP

摘要 PAGE III 摘 要 本课题设计一个基于 OMRON PLC的冰箱老化测试生产线的控制系统，主要控制箱体在多条生产线中的进出功能，确保安全、畅通地按照既定工艺进行箱体传送，以实现地面输送线的自动控制。本设计采用OMRON C200H型PLC及西门子变频器作为主要的控制器件，来完成冰箱的地面输送线自动移载及不同生产方式的控制。本文详细介绍了PLC的编程方法在工业自动控制领域的应用，尤其是在地面输送带控制系统和设计中。软件是利用CX-P型PLC的基本指令和特殊功能指令构建控制程序的，包括梯形图、程序指令表和时序图。通过程序的编制，达到了自动控制的目的，并增加了防撞保护设计。由于本程序的通用性强，所以通过不大的修改即可用于其它生产线中。对于冰箱的地面输送系统的设计，本文综合了多种方案比较，指出了本系统采用的设计方案诸多优点。根据本文的研究方案设计的冰箱地面输送线电气自动控制系统，功能强、成本低、易维护、可靠性高，具有很强的实际意义。 关键词：地面输送线,地面线控制,变频器,光电开关 Abstract The aging test subject to design a refrigerator production line control system programming based on OMRON PLC.The design of the main control box in a multi-production lines in and out of function, to ensure safe, smooth box according to the established technology of transmission lines in order to achieve automatic control of ground transportation. This design uses OMRON C200H PLC and Siemens inverter type as the main control device, to complete the transmission line refrigerator automatically shift the ground set and different modes of production control. This paper describes the ground conveyor system PLC control and programming. Software-based PLC using CX-P basic instructions and special function instruction building control procedures, including the ladder, the program instruction table and timing diagram. Through the process of preparation.Achieved the purpose of automation and increased crash protection design. Since the programs versatility, it can be used by small changes to other production lines. Ground transportation system for refrigerator design, this comprehensive comparison of the various programs that use this system, the design of many advantages.According to this design of the refrigerator conveyor line automatic control system,this system has strong function, low cost, easy maintenance,and high reliability .Which has great practical significance. Key words： The ground conveyor system, programmable logic cont