烧结中低温余热吸收制冷系统的设计探索.docVIP

烧结中低温余热吸收制冷系统的设计 作 者 姓 名： 指 导 老 师： 单 位 名 称： 专 业 名 称：  Design of bsorption Refrigeration System using Medium-low Temperauted Sintering Waste Heat by Supervisor: June 2011  毕业设计（论文）任务书 毕业设计（论文）题目： 烧结中低温余热吸收制冷系统的设计 设计(论文)的基本内容： 烧结中低温余热特点的研究 烧结中低温余热吸收制冷系统的热力学机理研究以及可行性 系统设计 毕业设计（论文）专题部分： 题目：　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　 设计或论文专题的基本内容： 学生接受毕业设计（论文）题目日期 　　　　　　　　　　　　　第　1　周指导教师签字： 年　　月　　日  烧结中低温余热吸收制冷系统的设计 摘 要 关键词：溴化锂，吸收，回收余热 Design of absorption refrigeration system using medium-low temperauted sintering waste heatAbstract In the current iron and steel enterprises，their utilization of waste heat is not high, especially in low-temperature waste heat utilization. For the current iron and steel enterprises in the low temperature below 250 ℃ heat treatment method is directly discharged into the air, which caused great waste of energy, so this design is to create a cooling system using lithium bromide low-temperature waste heat to reduce energy waste, and can provide their needs for the mill of the cold. In this design, we can take advantage of sintering machine to produce the look of the waste heat of 250 ℃ heat, we designed a heat collection system, and install it in the sintering machine Ⅳ section, the section of the heat supply to the collected lithium bromide refrigeration system to take advantage of the heat of the heat. In order to maximize the use of sintering heat, the paper three commonly used lithium bromide refrigeration system was calculated, they are single-effect lithium bromide refrigeration systems, lithium bromide double-effect refrigeration system in series, parallel double-effect lithium bromide refrigeration system. Calculated by comparing them during the maximum heat coefficient and the maximum cooling capacity to be double-effect lithium bromide refrigeration system for maximum utilization of waste heat,