毕设论文---基于虚拟仪器的电机实验检测系统.docVIP

基于Lab VIEW的电机实验检测系统 摘 要 虚拟仪器（Virtual Instrument） Experiment detection system of electric machine based on LabVIEW Abstract Virtual instrument (VI) is a great new production what is based on integrating computer hardware and software in addition bus technology with measuring and instrumentation technology. Exploiting the detection system of electromechanical parametric with virtual instrument is primary task of the paper. Electromechanical parameters which should be detected include voltage 、electrical current、temperature etc. The stand or fall of electromechanical character depended on that satisfy the standard or not. In this paper, the theory of electromechanical parameter measurement and the design way of the system with LabVIEW was introduced. After the VI’s actuality was analysed, a virtual electric parameter measuring system applying to electrical experiment teaching was researched; The PC-DAQ mode was selected to constitute the VI measuring system. And the graphical programming language LabVIEW was used as software development platform. A specimen of the virtual measuring system had completed. During the design of hardware circuit, the signal conditioning circuit and the DAQ card is important to whole system’s indispensable department. The matters which need attention in doing printed circuit board were showed. About the software, the idea of modularized design was emphasized in this paper. Many program modules were introduced in details, including the data storage with reading, parametric counting and so on. The conclusion and recommendations was presented in the end of the paper. Keywords: Electrical Parameter，LabVIEW，Detection 目录 摘 要 I Abstract II 1 绪 论 1 1.1虚拟仪器及LabVIEW概念 1 1.2 LabVIEW的特点及发展前景 3 1.3 课题意义及任务 4 2 系统总体结构设计 5 2.1 LabVIEW测试系统及设计指标 5 2.1.1 虚拟仪器的系统构成 5 2.1.2 系统的设计指标 6 2.2 系统测量原理 6 2.2.1 交流电气参数的测量原理 7 2.2.2 L、R、C 参数测量原理 10 3 虚拟仪器（LabVIEW）的系统平台设计 12 3.1 虚拟仪器（LabVIEW）的硬件平台设计 12 3.1.1 信号调理及数据库采集卡 12 3.1.2 GPIB(General Purpose Inter