本科毕业论文_热成型机.docVIP

热成型机毕业论文 热成型机控制系统设计 摘要 本文以为汕头市明发机械有限公司ZXSJ型全自动真空吸塑机配套开发的控制系统为背景，从工程的角度论述了该系统的设计和开发过程，主要突出了系统智能化和人性化的特点。 本设计是在热成型机动作控制工艺的研究的基础上，将PLC、位置控制模块、传感技术、触摸屏等先进的控制手段和技术引入到热成型机的控制系统中，实现了热成型机的动作顺序控制、控制参数及工艺参数的数字化、人机交互的人性化设计，使该机的功能和性能都得到质的提高。设计内容主要包括硬件部分PLC、功能模块、触摸屏等的配置及硬件电路的详细设计、系统的安装、仿真；软件部分包括控制系统的PLC程序设计、人机界面设计等。 该设计基本上实现了ZXSJ型全自动真空吸塑机的控制要求，系统简约、实用性强。系统的人机界面友好美观、操作简便、控制水平较高，符合人性化设计原则，能满足厂方技术人员的使用需求。 关键词：热成型机；工艺流程；可编程控制器；运动控制；触摸屏 The Control System of the Thermoforming Machine Design Abstract In this thesis, I take the project of developing the control system of ZXSJ Automatic Vacuum Plastic-absorbing Machine for Shantou Mingfa Mechanical Co.,Ltd as background, discuss the course of system’s design and realization in an rngineering view and emphasize the two characters of this system: Intelligence and Human. This design is base on the study of the Thermoforming Machine’s Movement- control Technology. ZXSJ automatic vacuum plastic-absorbing machine achieved these functions here as follows: program control for plastic-absorbing movement, digital parameter, human touch screen interface, by means of introduced some advanced control instruments and skills into system, such as PLC, Location control Module, Sensor, touch screen and so on. It means that the control performance of ZXSJ plastic-absorbing machine has increased a lot and achieved the advanced level. The design including the Hardware design such as PLC, Function module, touch srceen, Circuit design and installation, simulation; The software design was made up of program disign and interface design. The disign of the control system has fullfilled the requirements of ZXSJ automatic vacuum plastic-absorbing machine. The hardware design is simple, practical. Moreover, the system has frendly easy-to-use interface and advanced control technology. As a result, it can apply to ordinary users and accord with the principle of human design. Keywords: Thermoforming Machine; Movement technology; PLC