步进电机细分控制器的计.docVIP

湖南生物机电职业技术学院 毕业设计（论文） 题目：步进电机细分控制器的设计 专 业 电子电气工程系 班 级 电子315班 姓 名 指导教师 2008年5 月 目录 摘要 关键词 一．引言 二．步进电机 1.1 步进电机的原理 2 1.2 步进电机的基本参数 2 1.3 步进电机的特点 三．步进电机的应用 2.1 步进电机的选择 2.2 应用中的注意点 2.3 其他说明 四．步进电机驱动器的原理 4.1脉冲信号的产生 4.2功率放大 4.3细分驱动器 五．细分方案的探讨 5.1方案一：（采用8031和8155够成的细分系统） 控制系统工作原理 方案一小结 2.方案二：（采用TA8435H芯片的步进电机细分方法 TA8435芯片特点 TA8435细分工作原理 单片机与TA8345连接控制步进电机原理图 单片机程序的设计 方案二小结 六．总结 七．参考文献 Summary 】tread is a kind of performance organization that will give or get an electric shock a pulse conversion to move for the Cape into the electrical engineering.When tread to receive to a pulse signal into the actuator, it drives a step to enter the direction that the electrical engineering press the enactment to turn to move an angle(be called tread to be apart from Cape) for fix, it of revolve to fix of the angle one-step movement of.Can pass control pulse piece to control a Cape to move quantity, attain the purpose of accurate fixed position thus;The purpose canned pass control pulse frequency to control electrical engineering to become dynamic speed and acceleration in the meantime, attained to adjust thus soon.Tread into electrical engineering can conduct and actions a kind of control use of special kind electrical engineering, make use of the characteristics that it doesnt have backlog error margin(the accuracy is 100%), extensively applied in various open a wreath control. More and in common usely tread to include a reaction type to tread a Ci type to tread into the electrical engineering(PM) into the electrical engineering(VR) and always into the electrical engineering now, mixture the type tread into the electrical engineering(HB) and the list mutually the type tread etc. is into the electrical engineering. 【Keyword 】 electric motor, 8031, 8055, chip, subdivide system，Procedure 引 言 一