TSZ 07.03.19 上、下模作业指引.docVIP

Tool Changeover instruction 上、下模作业指引 1.Purpose / 目的 Improve the quality and efficiency, prevent mistakes and unnecessary lost. 提高工作质量与效率，防止出错造成损失。2.Scope / 范围 Use for uploading and downloading the mould process. 适用试模技术员上、下模作业。3.Responsibility / 职 责 The technicians perform the uploading downloading according to instruction. 试模技术员负责依据此文件的要求进行上、下模作业。4.Definitions / 定 义 N/A 5.Process description / 过程描述 5.1 Step上模作业步骤: 5.1.1 Verify if the water circuit and protection switch work well. 上模前先确认运水通畅与否，安全保护开关信号正确与否。 5.1.2 Pre-understand which the first action between extraction and close/open